Analysis of Stepped Impedance Microstrip Line Filter for S Band Application

  • Pravesh Singh
  • Saurabh Kumar Singh
  • Amit Kumar
  • Ruchita Gautam
DOI: https://doi.org/10.53555/as.v4i5.2042
Keywords: Low Pass Filter, Microstrip, Stepped Impedance Configuration

Abstract

In this paper different order lowpass filter has been analyzed using Stepped Impedance method. For N=3 and N=6 the response has been compared. Microstrip line is one of the most popular type of planar transmission lines and is easily miniaturized and integrated with both passive and active microwave devices This paper fulfills the demand of newer microwave and millimeter-wave systems to meet the various issues such as cost, performance and size in the field of telecommunication. This paper presents a low insertion loss and the low-cost design S-lowpass filter(LPF) with the use of microstrip layout having the center frequency at 2.5GHz with the permittivity of value 4.4 and the height/thickness of the substrate is 1.5mm. The use of microstrip provides the advantages of simplicity and ease of fabrication. The design and simulation are performed by using the 3D full wave electromagnetic simulator IE3D.

Downloads

Download data is not yet available.

Author Biographies

Saurabh Kumar Singh

Assistant Professor, Krishna Engineering College, Ghaziabad, India

Amit Kumar

Assistant Professor, Subharti Institute of Technology and Engineering , Meerut, India

Ruchita Gautam

Associate Professor KIET Group of Institutions.Ghaziabad, India

References

[1] Jia-Shen G. Hong & M.J. Lancaster, “Microstrip Filters for RF/Microwave Applications”
[2] John Wiley & Sons Inc., 2001.
[3] D. M. Pozar, “Microwave Engineering,” John Wiley & Sons Inc. , 2010.
[4] G.L.Mathaei, L.Young & E.M.T. Jones, “Microwave Filter impedance matching networks and coupling structures,” Artech House, Dedham, Mass, 1980
[5] Sudipta Das, Dr. S.K.Chowdhury, “Design Simulation and Fabrication of Stepped Imped-ance. Microstrip line Low Pass Filter for S- band Application using IE3D and MATLAB” IJECT Vol. 3, Issue 1, Jan. - March 2012
[6] Constantine A. Balanis,“Antenna Theory: analysis and design, 3rd Edition, John Wiley & Sons Inc., 2005.
[7] IE3D Software Developed by M/S Zeland Software Inc.
[8] Tentzeris M., Laskar J., Sutono A., Lee C.-H., Davis M.F., Obatoyinbo A. and Lim K., “Development of Integrated 3D Microwave-Millimeter Wave Radio Front-End System-on-Package (SOP)”, European GaAs Conference,vol.3, pp. 235-238,2001 System-on-Package (SOP)”, European GaAs Conference,vol.3, pp. 235- 238,2001
Published
2018-05-31
How to Cite
Singh, P., Singh, S. K., Kumar, A., & Gautam, R. (2018). Analysis of Stepped Impedance Microstrip Line Filter for S Band Application. IJRDO-Journal of Applied Science, 4(5), 21-26. https://doi.org/10.53555/as.v4i5.2042
Issue
Vol. 4 No. 5 (2018): IJRDO - Journal of Applied Science
Section
Articles

Copyright (c) 2018 IJRDO - Journal of Applied Science (ISSN: 2455-6653)

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Author(s) and co-author(s) jointly and severally represent and warrant that the Article is original with the author(s) and does not infringe any copyright or violate any other right of any third parties, and that the Article has not been published elsewhere. Author(s) agree to the terms that the IJRDO Journal will have the full right to remove the published article on any misconduct found in the published article.