STAEM VALVES AND STEAM TRAPS FOR THERMAL POWER STATION

  • Mr. SUNIL JANKAR THERMAL ENGG, LNCTS (RIT), INDORE
  • Prof. R S RATHORE LNCTS (RIT), INDORE
  • ASHOK KUMAR GUPTA LNCTS (RIT) INDORE
DOI: https://doi.org/10.53555/mce.v1i6.995
Keywords: steam traps, steam valves, drain header, condensate, air vent

Abstract

There are different types of valve available for industrial application as per the requirement. valves are classified based on material use, based on application, based on function etc. No steam system is complete without that crucial component 'the steam trap' (or trap). This is the most important link in the condensate loop because it connects steam usage with condensate return. A steam trap quite literally 'purges' condensate, (as well as air and other incondensable gases), out of the system, allowing steam to reach its destination in as dry a state/condition as possible to perform its task efficiently and economically.

Downloads

Download data is not yet available.

Author Biographies

Mr. SUNIL JANKAR, THERMAL ENGG, LNCTS (RIT), INDORE

P.G. STUDENT

Prof. R S RATHORE, LNCTS (RIT), INDORE

ASST. PROF

MECHANICAL DEPARTMENT

ASHOK KUMAR GUPTA, LNCTS (RIT) INDORE

HOD, MECHANICAL DEPARTMENT

Published
2015-06-30
How to Cite
JANKAR, M. S., RATHORE, P. R. S., & GUPTA, A. K. (2015). STAEM VALVES AND STEAM TRAPS FOR THERMAL POWER STATION. IJRDO - Journal of Mechanical And Civil Engineering, 1(6), 129-134. https://doi.org/10.53555/mce.v1i6.995
Issue
Vol. 1 No. 6 (2015): IJRDO - Journal of Mechanical and Civil Engineering
Section
Articles

Author(s) and co-author(s) jointly and severally represent and warrant that the Article is original with the author(s) and does not infringe any copyright or violate any other right of any third parties, and that the Article has not been published elsewhere. Author(s) agree to the terms that the IJRDO Journal will have the full right to remove the published article on any misconduct found in the published article.