POWER TRANSMISSION IN AUTOMOBILES

  • Varun Garg Dronacharya College of Engineering Khentawas, Farukhnagar,Gurgaon
  • Vijay Chaurasiya Dronacharya College of Engineering Khentawas, Farukhnagar,Gurgaon
  • Vikalp lakhera Dronacharya College of Engineering Khentawas, Farukhnagar,Gurgaon
Keywords: POWER, TRANSMISSION, AUTOMOBILES

Abstract

A machine consists of a power source and a power transmission system, which provides controlled application of the power. Merriam-Webster defines transmission as an assembly of parts including the speed-changing gears and the propeller shaft by which the power is transmitted from an engine to a live axle.Often transmission refers simply to the gearbox that usesgears and gear trains to provide speed and torque conversions from a rotating power source to another device. In British English, the term transmission refers to the whole drivetrain, including clutch, gearbox, prop shaft (for rear-wheel drive), differential, and final drive shafts. In American English, however, the term refers more specifically to the gearboxalone, and the usage details are different. The most common use is in motor vehicles, where the transmission adapts the output of the internal combustion engine to the drive wheels. Such engines need to operate at a relatively high rotational speed, which is inappropriate for starting, stopping, and slower travel. The transmission reduces the higher engine speed to the slower wheel speed, increasing torquein the process. Transmissions are also used on pedal bicycles, fixed machines, and where different rotational speeds and torques are adapted. Often, a transmission has multiple gear ratios (or simply "gears"), with the ability to switch between them as speed varies. This switching may be done manually (by the operator), or automatically. Directional (forward and reverse) control may also be provided. Single-ratio transmissions also exist, which simply change the speed and torque (and sometimes direction) of motor output. In motor vehicles, the transmission generally is connected to the engine crankshaft via a flywheel and/or clutch and/or fluid coupling, partly because internal combustion engines cannot run below a particular speed. The output of the transmission is transmitted via driveshaft to one or more differentials, which in turn, drive the wheels. While a differential may also provide gear reduction, its primary purpose is to permit the wheels at either end of an axle to rotate at different speeds (essential to avoid wheel slippage on turns) as it changes the direction of rotation. Conventional gear/belt transmissions are not the only mechanism for speed/torque adaptation. Alternative mechanisms include torque converters and power transformation (for example, diesel-electric transmission and hydraulic drive system). Hybrid configurations also exist. 

Downloads

Download data is not yet available.

Author Biographies

Varun Garg, Dronacharya College of Engineering Khentawas, Farukhnagar,Gurgaon

Mechanical Department

Vijay Chaurasiya, Dronacharya College of Engineering Khentawas, Farukhnagar,Gurgaon

Mechanical Department

Vikalp lakhera, Dronacharya College of Engineering Khentawas, Farukhnagar,Gurgaon

Mechanical Department

Published
2015-05-31
How to Cite
Garg, V., Chaurasiya, V., & lakhera, V. (2015). POWER TRANSMISSION IN AUTOMOBILES. IJRDO - Journal of Mechanical And Civil Engineering, 1(5), 34-40. https://doi.org/10.53555/mce.v1i5.677