COMPARISION OF STAINLESS STEEL, EPOXY GLASS BALL BEARING AND CAST NYLON BUSH FOR OPTIMIZATION OF NATURAL FREQUENCY WITH THE HELP OF FEM

  • Vishal V Savaliya BMCET SURAT
  • Hitesh Mendapara BMCET SURAT
  • Ajay Savaliya BMCET SURAT
  • Pushpak Chalodiya BMCET SURAT
  • Sunil Jankar BMCET SURAT
  • Jignesh Patel BMCET SURAT
DOI: https://doi.org/10.53555/mce.v1i5.630
Keywords: -component, formatting, style, styling, insert (key words), (minimum 5 keyword require), [10pt, Times new roman,Italic, line spacing 1.0]

Abstract

According to GTU for industry define problem (IDP) , We visited " Meera Industry pvt. Ltd." situated at SACHIN GIDC, SURAT .This is about two for one yarn twister machine (TFO machine).In two for one twister yarn ( thread twisting ) machine ,There is major problem of vibration in machine due ti high speed of gears with cams ans also problem is wearing quickly of bushing material contacted with rotating cams in Gear box because of high speed of cam and high friction of bush and we have to replace in a time . By this problem we have suggested a solution to change a better material instead of current bushing material element. For it we will design in PRO E and analysis in ANSYS of diffrent materials. Through comparision of numerical analysis data of different materials we will choose better material elements instead of current bushing material. This will help in the problem of wear out of the bush in machine with suitable root cause we will solve this problem in two for one yarn twister machine in which bushing material has developed because of its combination of low coefficient of friction with self-lubricating properties, good mechanical properties and dimensional stability

Downloads

Download data is not yet available.

Author Biographies

Vishal V Savaliya, BMCET SURAT

U.G. STUDENT,MECHANICAL ENGINEERING

Hitesh Mendapara, BMCET SURAT

U.G. STUDENT,MECHANICAL ENGINEERING

Ajay Savaliya, BMCET SURAT

U.G. STUDENT,MECHANICAL ENGINEERING

Pushpak Chalodiya, BMCET SURAT

U.G. STUDENT,MECHANICAL ENGINEERING

Sunil Jankar, BMCET SURAT

ASST. PROF.,MECHANICAL ENGINEERING

Jignesh Patel, BMCET SURAT

ASST. PROF.,MECHANICAL ENGINEERING

Published
2015-05-31
How to Cite
Savaliya, V. V., Mendapara, H., Savaliya, A., Chalodiya, P., Jankar, S., & Patel, J. (2015). COMPARISION OF STAINLESS STEEL, EPOXY GLASS BALL BEARING AND CAST NYLON BUSH FOR OPTIMIZATION OF NATURAL FREQUENCY WITH THE HELP OF FEM. IJRDO - Journal of Mechanical And Civil Engineering, 1(5), 119-124. https://doi.org/10.53555/mce.v1i5.630
Issue
Vol. 1 No. 5 (2015): IJRDO - Journal of Mechanical and Civil Engineering
Section
Articles

Author(s) and co-author(s) jointly and severally represent and warrant that the Article is original with the author(s) and does not infringe any copyright or violate any other right of any third parties, and that the Article has not been published elsewhere. Author(s) agree to the terms that the IJRDO Journal will have the full right to remove the published article on any misconduct found in the published article.