DESIGN OF RC DEEP BEAMS AS PER INDIAN, EUROPEAN AND AMERICAN CODES OF PRACTICE

  • Mr.K.Dinesh kumar New Prince Shri Bahvani College of Engineering and Technology,
  • Ms.S. Subathra New Prince Shri Bahvani College of Engineering and Technology,
DOI: https://doi.org/10.53555/mce.v3i2.1432
Keywords: Limit state design, RC deep beam, limiting moment of resistance, side face reinforcement.

Abstract

Provisions of Indian (IS 456: 2000), European (EC2 - 1992) and American (ACI - 318) codes of practice for
the design of RC deep beams have been critically studied and reported. As per the recommendations of these codes,
RC deep beams have been designed adopting limit state method. The quantities of concrete and steel and the total
cost of deep beams for three different spans have been calculated and are compared using bar chart.

Downloads

Download data is not yet available.

Author Biographies

Mr.K.Dinesh kumar, New Prince Shri Bahvani College of Engineering and Technology,

Assistant Professor of Civil Engineering

Ms.S. Subathra, New Prince Shri Bahvani College of Engineering and Technology,

Assistant Professor of Civil Engineering,

Published
2017-02-28
How to Cite
kumar, M., & Subathra, M. (2017). DESIGN OF RC DEEP BEAMS AS PER INDIAN, EUROPEAN AND AMERICAN CODES OF PRACTICE. IJRDO - Journal of Mechanical And Civil Engineering, 3(2), 09-13. https://doi.org/10.53555/mce.v3i2.1432
Issue
Vol. 3 No. 2 (2017): IJRDO - Journal of Mechanical and Civil Engineering
Section
Articles

Author(s) and co-author(s) jointly and severally represent and warrant that the Article is original with the author(s) and does not infringe any copyright or violate any other right of any third parties, and that the Article has not been published elsewhere. Author(s) agree to the terms that the IJRDO Journal will have the full right to remove the published article on any misconduct found in the published article.