DESIGN & ANALYSIS OF CONNECTING ROD BY COMPOSITE MATERIAL

  • A.Prem kumar K.S.R.Institute for Engineering and Technology,Tiruchengode,Namakkal(Dt),Tamilnadu.
DOI: https://doi.org/10.53555/mce.v1i7.1084
Keywords: connecting rod, ANSYS,, composite, boron carbide, analysis

Abstract

Connecting rod is one of the important components of the whole engine assembly as it acts as a mediator between piston assembly and crankshaft. Its converting the reciprocating motion of the piston to rotary motion of the crank. Also it faces a lot of tensile and compressive loads during its life time. Generally connecting rods are manufactured using carbon steel and in recent days aluminium alloys are finding its application in connecting rod. In this work connecting rod is replaced by aluminium based composite material reinforced with Boron carbide. And it also describes the modelling and analysis of connecting rod. Proe solid modeling software is used to generate the 3-D solid model of Connecting rod. Ansys software is used to analyze the connecting rod. The main aim of the project is to analysis the stress, strain, deformation of connecting rod by varying material with same geometry.

Downloads

Download data is not yet available.

Author Biography

A.Prem kumar, K.S.R.Institute for Engineering and Technology,Tiruchengode,Namakkal(Dt),Tamilnadu.

Assistant Professor in Department of Mechanical Engineering

Published
2015-07-31
How to Cite
kumar, A. (2015). DESIGN & ANALYSIS OF CONNECTING ROD BY COMPOSITE MATERIAL. IJRDO - Journal of Mechanical And Civil Engineering, 1(7), 01-05. https://doi.org/10.53555/mce.v1i7.1084
Issue
Vol. 1 No. 7 (2015): IJRDO - Journal of Mechanical and Civil Engineering
Section
Articles

Author(s) and co-author(s) jointly and severally represent and warrant that the Article is original with the author(s) and does not infringe any copyright or violate any other right of any third parties, and that the Article has not been published elsewhere. Author(s) agree to the terms that the IJRDO Journal will have the full right to remove the published article on any misconduct found in the published article.