EXPERIMENTAL INVESTIGATION OF POLYMER CONCRETE AND FIBER REINFORCED CONCRETE WITH CONVENTIONAL CONCRETE
Abstract
In this project is planned to compare two different high strength concrete, one is made up of polymer and another one is made up of steel fiber. In polymer concrete, unsaturated isopthalic polyester(9%,12%,15%,18%) along with a catalyst cobalt octate(1%) and a accelerator methyl ethyl ketone peroxide(1%). In fiber reinforced concrete, binding wire of 1 cm long is going to be used as steel fiber(1%,1.5%,2%,2.5%). Using the above concrete, appreciable number cube, cylinders and prisms are going to be made and they will test for compressive and tensile strength respectively. The test results are going to be compared with conventional concrete from the comparisons the effectiveness of the high strength concrete will be evaluated.
Downloads
Author(s) and co-author(s) jointly and severally represent and warrant that the Article is original with the author(s) and does not infringe any copyright or violate any other right of any third parties, and that the Article has not been published elsewhere. Author(s) agree to the terms that the IJRDO Journal will have the full right to remove the published article on any misconduct found in the published article.